The LUDJET Steering Nozzle Extension is designed to fit selected OEM Yamaha and Kawasaki steering nozzles.

Current fitment includes:

• Yamaha SuperJet 2-stroke 1990 to 2007, including square nose and round nose models (also fits Yamaha WaveRaider and Yamaha Blaster)
• Yamaha SuperJet 2-stroke 2008 to 2020
• Yamaha SuperJet 4-stroke 2021 and newer
• Kawasaki 750 SXi & 800 SX-R
• Kawasaki 1500 SX-R

If you are not sure about your model or nozzle, please contact me before ordering.

The LUDJET Steering Nozzle Extension is a custom-made aftermarket part designed to fit onto compatible OEM steering nozzles. It extends the nozzle length to improve steering response and change the handling feel of the ski.

The extension changes the steering feel by increasing the effective nozzle length. Depending on the size you choose, the ski can feel more responsive, sharper, or more aggressive in turns. It lets riders choose a handling style that better suits their riding preference.

If you want a noticeable change in steering response while keeping a natural feel, the +30mm is a strong all-round choice.

If you want a sharper and more aggressive steering feel, the +50mm is the most extreme option.

The extension is currently available in 2 sizes:

• +30mm for a noticeable and responsive steering feel
• +50mm for a sharper and more aggressive handling feel

The part is designed for real riding use and has been tested on the water. It is made from ASA, a material selected for its UV resistance, saltwater resistance, and suitability for outdoor marine use.

As with any aftermarket part, it must be installed correctly, secured properly with the clamp, and inspected regularly before riding.

Yes, the part is made using industrial-quality 3D printing, but it is not a basic decorative print. It is a functional aftermarket part designed, tested, and produced for real use on the water.

3D printing allows small-batch production, fast development, and practical design improvements without the cost of traditional moulds or large production runs.

The extension is made from ASA, a material chosen for its UV resistance and saltwater resistance, making it suitable for marine use.

The product is made using industrial-quality 3D printing in small production runs.

Yes. It has been tested on Yamaha SuperJet square nose models, and the fitment is the same as the round nose model when using the compatible OEM nozzle.

No. The extension is designed to fit compatible OEM nozzles only. It does not fit aftermarket nozzles.

Yes. Installation is simple and quick:

1. Push the extension onto the OEM nozzle by hand
2. Fit the stainless steel clamp
3. Tighten the clamp with a flat-head screwdriver
4. Check that everything is secure before riding

You only need a flat-head screwdriver to tighten the clamp.

Yes. A 100mm stainless steel clamp is included with the product.

Yes, it can be installed without the clamp for testing or swapping sizes because the extension snaps onto the nozzle with a strong fit.

However, I recommend using the clamp during normal use to secure the extension properly. There is no need to overtighten it. Tighten it only enough to hold the extension securely in place.

The extension is designed to snap onto the OEM nozzle with a strong fit. The clamp adds extra security while riding.

Competition legality depends on the race organisation, class, event, and current rulebook being used. Some classes allow steering nozzle changes or modifications, while others may be more restrictive.

If you plan to use the part in competition, please check the latest rules for your class and confirm with the race organiser before using it in an official event.

No. This product is designed to affect steering response and handling feel, not engine power or top speed.

Yes. This product is made to order.

I do not hold large stock at this stage. Each unit is produced based on customer orders.

Production time is usually 24 to 48 hours before shipping.

Shipping time depends on your location and the shipping method selected at checkout. Delivery estimates are shown at checkout where available.

Yes, international shipping is available.

Please note that customs duties, import taxes, or other fees may apply depending on your country.

International orders may be subject to customs duties, import taxes, clearance fees, or other local charges depending on your country. These charges are not controlled by LUDJET and are usually collected by the carrier or local customs authority.

DHL may charge approximately USD 20 on delivery for US customs processing and duties. This charge is collected by DHL/customs, not by LUDJET.

LUDJET ships from the UAE using international courier services. Even for a small part, courier shipping includes handling, export processing, tracking, fuel surcharges, and carrier minimum charges.

I try to offer reliable shipping options and keep the shipping cost as fair as possible.

DHL may charge approximately USD 20 on delivery for US customs processing and duties. This charge is collected by DHL/customs, not by LUDJET.

If there is an issue with your order, please contact me and I will do my best to help.

Returns may be accepted depending on the condition of the item and the nature of the issue. Please review my return policy for full details.

Please contact me as soon as possible. If production has not started yet, I may be able to update your order.

If the item has already been produced or shipped, changes may no longer be possible.

If you are unsure which size is best for your riding style, contact me and I will be happy to help.

No. This is an aftermarket product developed independently for riders looking for a custom steering upgrade.

As with any aftermarket part, installation, setup, and use are the customer’s responsibility. Please make sure the product is installed correctly and checked regularly before riding.

For any questions about fitment, size choice, shipping, or your order, please contact me by email. I respond quickly and will be happy to help.